Draw two workdays into the plan for a shared home office

Use a floor plan to show where simultaneous calls, shared equipment and everyday storage will fit.

Bright shared living space with a sitting area and workstations
Bright shared living space with a sitting area and workstations Aleichem · CC BY-SA 3.0 · Resized for display
In this article

Two people share a room in a Plano home. One starts the morning on video calls and spends the afternoon working with printed documents. The other needs a quiet stretch of time until a client call starts at three. Their desks fit easily on a floor plan. The trouble starts when one person pulls out a chair to leave during a meeting, or the only printer needs attention while both are speaking.

Draw two workdays before choosing furniture. Use one ordinary day and one with a crowded calendar. Mark the tasks, when they overlap, and what each person will need to reach. Then test possible layouts using the equipment and working positions that matter. The best arrangement for this household is one it can use when both people are actually at work.

Compare two days with different demands

Write down the times each person is likely to have calls, quiet work, and tasks involving paper or shared equipment. Use a real calendar as a starting point, without including private meeting details. Put one person's day beside the other and mark where they overlap. Talk about which activities are flexible and which must happen at a given time. A meeting change on Thursday may be a better test of the room than a calm Monday.

Include the moments before and after the work. Identify where each person sets items when they enter, which objects they pick up repeatedly, and what must be put away before another activity starts. Someone who routinely spreads diagrams across a large table has a different space requirement from someone who uses one screen for most of the day. Both may need somewhere to leave work in progress without taking over a shared surface.

A household with children or visitors should also note when other people use the route past the room. Show the difference between a door usually left open and one people close for a call. Ask what should happen at a time when both people want the room closed or one needs to leave while the other is speaking.

Put the equipment and walking routes on one sketch

Draw the doors, windows, outlets, and fixed elements. Mark the furniture that will stay and the opening space it needs. Draw each monitor and chair, including the direction the person at the desk will face. Show where the printer, supplies, and bags would go. Then trace two routes through the room, one for a person coming in and another for somebody getting up from their desk.

Use the furniture the household has for the first test if it can be moved safely. Notice what the room feels like when two chairs are pulled out and a cabinet or file drawer is open. If someone has to walk between the other person and their camera to reach the printer, find out whether the printer can move or whether that equipment can be used at a different time. Try the change through a complete work task.

The OSHA workstation buying guide discusses having work surfaces that can hold equipment and considering the fit of chairs and desks. Use that context when checking that each person's actual equipment can fit in the layout. Draw the monitor, input devices, and any papers or tools that need to remain close. A clear space on a drawing might already be spoken for when the desk is in use.

Check for glare with both workstations occupied

Sit in the place each person would use when working. Check what appears on the screen when the usual lamps and overhead lights are on. Look again at the time of day when sunlight hits the room from another direction. Someone sitting opposite a window may see a reflection, while a person facing it may find the area around the monitor too bright.

The OSHA workstation environment guide describes sources of monitor glare and ways to consider light placement and window coverings. Try a changed display position or a different existing lighting setting during an actual working task. Make a note about which seat, time, and setting made the difference. See whether the change helps both workstations and whether the room still has enough light to use paper or walk through.

During a sample video call, check what each camera shows and where the light falls on the person speaking. A bright window behind one desk can appear in another desk's view. Decide which parts of the room should be free of background movement, especially if people regularly use the door. Keep the doorway and nearby surfaces on the design sketch so a proposal can be checked against what the two cameras will see.

Try a pair of simultaneous calls

Set up a short test with each person speaking as they usually do. Listen for what each can hear and what the microphones pick up. Try one person using a headset if that is something the household already expects to use. See what changes when a door is opened or a person crosses the room. Write down which kind of call creates the difficulty and whether it happens often enough to plan around.

One solution may be to turn the workstations, while another could be to use an available room for occasional overlapping calls. Try each with a typical task, including leaving the desk and returning afterward. Ask how much set-up is required and what equipment would have to move. Make clear which accommodation works for a brief overlap and which needs to be usable every day.

Chateau Concepts' design services page, from the sponsor, describes space planning, furnishings, lighting, and related interior design work. Bring the observations about overlapping calls and movement to a designer. Ask for the layout to show the sitting positions and the routes each person uses. If the plan proposes building changes, ask which specialists or approvals would need to be involved before making decisions about the work.

Give shared equipment and personal storage a place

Decide where shared supplies should be accessible and who will maintain them. Observe where each person collects a printout and where it waits until they return. If one person sometimes uses a shared scanner while the other prepares documents, see whether the two tasks compete for the same surface. A separate landing spot can make it easier to use the equipment without shifting somebody else's active work.

Check that each person can put away items that need to stay with their own work. The house may have one shared cabinet, but each person may need a drawer or shelf they do not have to clear for the other. Give supplies a clear spot for putting them back. Label what is shared in the plan, and decide who will be able to retrieve something when one desk is occupied.

Try an end-of-day reset. One person may finish work while the other remains on a call. See whether the person leaving can close a drawer or put a laptop away without passing behind the other chair. Check whether a route for clearing the room still exists once the workday begins again. Other planning ideas are collected in the Plano Beacon partner guides.

Choose one shared object that often travels and note where it winds up. A charging adapter may be used at both desks but usually left in a bag. One person could find it easily at the start of their day, while the other needs it several hours later. Try giving it a common storage spot reachable without moving someone else's papers. Observe whether that arrangement still works when both desks are occupied or a guest is using the room. If the object routinely stays in use at one station, decide whether the shared arrangement makes sense and document the decision before planning around it.

An occasional paper-heavy task can also serve as a test. Place the documents you would normally use on the surface you expect to share. Have the other person walk through getting paper, setting down a drink, or retrieving files from nearby. If both people need the surface, decide where work in progress can wait while the other task runs. Run the same test when the room is ready for a meeting so you can tell whether the storage plan supports the work instead of relying on a cleared desk.

Review the layout after an ordinary week

Keep a dated sketch showing the version you want to try. Record the task and time that prompted the main choices so you can see whether the plan solved them. Check the rooms when there is glare, when both people are speaking, and when someone needs to cross with a chair pulled back. Ask each person for one thing that became easier and one question to look at again.

If something still needs to change, describe the exact condition. “Move the printer nearer the door so I can pick up paper during a 10 a.m. call” is specific enough to test. A general request for more space gives the household little information about where to put it. Compare the option with the routes, seating positions and controls already in the room.

When a purchase is still under consideration, connect it to the task you tested. Ask whether the dimensions and features serve both workdays and what adjustment each person will make. Keep the current sketch with the choice so a later furniture or equipment change can be tested against the same day.

Sources

Share by email